ABB i-bus EIB Product Manual page 39

®
ABB i-bus EIB / KNX
4.11.2 Detailed description of the
communication objects
© 2004 ABB STOTZ-KONTAKT GmbH
Project design and programming
No Function
13 Setpoint
The setpoint value of the control function can be read out and assigned directly via this
object.
16 Slave brightness value
The light controller (master) sends the brightness value to further dimming actuators (slaves)
via this object.
17 Control active/inactive
Used to activate/deactivate the lighting control. By reading out the object value, it is possible
to indicate whether the control is currently active ("1") or inactive ("0").
Objects for the function "Slave mode in lighting control"
No Function
12/27 Slave active/inactive
Used to activate/deactivate the slave mode. On activation/deactivation of the slave mode
(e.g. by OFF command), the device reports the new switching state.
13/28 Slave brightness value
The dimmer receives the brightness value of a higher-order lighting control (master) via this
object.
Objects for the "Staircase lighting" function
No Function
12/27 Permanent ON
Used to keep the lighting switched on continuously when the staircase lighting function is
active (also called "Cleaning light").
13/28 Duration of staircase lighting
Modifies the duration of the staircase lighting (in seconds).
14/29 Warning stairc. lighting
Used as a warning before the staircase lighting time elapses. The object has the value "1"
during the warning period.
Objects for the function "Lightscene (8-bit)"
No Function
12/27 8-bit scene
Integrates the actuator into a scene. The object value contains a scene number as well as the
instruction as to whether a scene should be retrieved or the current output state should be
saved as a new scene value.
Objects for the "Blocking" function
No Function
12/27 Disable
Used to disable the output to prevent unwanted operation.
Object: "Telegr. switch": 1 Bit (EIS1)
This object switches the output on or off.
Object name Data type
Light control 1 Byte (EIS6)
Light control 1 Byte (EIS6)
Light control 1 Bit (EIS1)
Object name Data type
Output A 1 Bit (EIS1)
Output A 1 Byte (EIS6)
Object name Data type
Output A 1 Bit (EIS1)
2 Byte (EIS10)
Output A
Output A 1 Bit (EIS1)
Object name Data type
1 Byte (non EIS)
Output A
Object name Data type
Output A 1 Bit (EIS1)
Flags
CRWT
CRT
CRW
Flags
CWT
CRW
Flags
CW
CRW
CT
Flags
CW
Flags
CW
39