Hitachi HF-BX1000 Instruction Manual page 11

SAFETY INSTRUCTIONS (Continued)
 Before you start the work, make sure you shut down the OS, unplug the
power cord from the outlet, and wait for at least one minute. Otherwise, an
electric shock or failure of the equipment may result.
 When you install or remove an HDD, make sure you do not cut your fingers
on the protrusions.
 When you install or remove an HDD, make sure the drive bay number is
correct. If you remove an HDD and install it in a different bay, a
configuration information mismatch occurs and the equipment may not start
or the data stored on the HDD may be lost.
 Before you start the work, make sure you shut down the OS, unplug the
power cord from the outlet, and wait for at least one minute. Otherwise, an
electric shock or failure of the equipment may result.
 When you install or remove a CFast, make sure you do not cut your fingers
on the protrusions.
 Make sure to check whether the installation of this equipment was carried out
with certainty. Otherwise the equipment may occr fall down and injure. If
there are poor attachments, slack of a screw, etc., there is a possibility that it
may be injured by equipment falling.
S-8
(See page 5-16.)
(See page 5-18.)
(See page 5-19.)
(See page 5-22.)