Countermeasures; Problems That Occur Before The Os Startup - Hitachi HF-BX1000 Instruction Manual

6.2 Countermeasures

6.2.1 Problems that occur before the OS startup

(1) The equipment does not start.
1. When the power switch is turned on, fans do not rotate or the power lamp is not turned
on.
<Possible cause>
Power is not supplied to the equipment.
<Action>
1. Make sure that the plug of the power cord is connected to the outlet.
2. Make sure that the circuit breaker on the power distribution panel is on.
3. Perform steps 1 and 2 and press the power switch.
⇒When the equipment starts, fans rotate and the power lamp is turned on.
2. When the power switch is turned on, fans rotate and the power lamp is lit, but the status
indication LEDs and the Digital LEDs for Status indication do not display anything.
<Possible cause>
The equipment has failed.
<Action>
1. Contact your system administrator or maintenance personnel.
3. The screen is blank.
<Possible cause>
The display has a problem.
<Action>
1. Make sure that the power switch of the display is on.
2. Make sure that the plug of the power cord for the display is connected to the outlet.
3. Make sure that the equipment and the display are connected through a display interface
cable.
4. Re-examine the display settings. For information about the display settings, refer to the
manual of the display.
6-3
6. TROUBLESHOOTING