HP TippingPoint Series Hardware Installation And Safety Manual page 17

WARNING!
WARNING!
building installation. Install only in accordance with national and local wiring regulations.
WARNING!
activity.
WARNING!
recommended ambient temperature of 104° F (40° C). To prevent airflow restriction, allow at least 3 inches
(7.6 cm) of clearance around the ventilation openings.
WARNING!
racks ambient temperatures do not exceed maximum recommended ambient temperature of 104 °F (40 °C)
WARNING!
regulations.
Parts Warnings
WARNING!
WARNING!
covers are in place. Blank faceplates and cover panels serve three important functions: they prevent
exposure to hazardous voltages and currents inside the chassis; they contain electromagnetic interference
(EMI) that could disrupt other equipment; and they direct the flow of cooling air through the chassis.
WARNING!
WARNING!
according to the instructions.
WARNING!
exceed 240 V.
This unit is intended for installation in restricted access areas only.
This product requires short-circuit (overcurrent) protection, to be provided as part of the
Do not work on the system or connect or disconnect cables during periods of lightning
To prevent the unit from overheating, do not operate it in an area that exceeds the maximum
Enclosed racks may have higher ambient temperatures than open racks. Ensure enclosed
The final disposal of this product must be done according to all national laws and
Do not operate the system unless all cards and top cover is in place.
On the product, do not operate the system unless all cards, faceplates, front covers, and rear
To reduce the risk of fire, use only No. 26 AWG or larger telecommunication line cord.
Risk of explosion if battery is replaced by an incorrect type. Dispose of used batteries
When connecting equipment to IT power distributions, Phase to phase voltage must not
TippingPoint 10/110/330 Hardware Installation and Safety Guide 9