Leds - HP TippingPoint Series Hardware Installation And Safety Manual

Figure 3-2 shows the chassis back panel for a TippingPoint 10.
Figure 3-2 TippingPoint 10 - Back Panel
The TippingPoint 10 ships with the following pre-installed components:
• Two 10/100/1000 Gigabit Ethernet segments supporting up to 20 Mbps aggregate across all
segments
• One 10/100/1000 Gigabit Ethernet management port
• One serial console RJ-45 port (Pinout: 1-RTS, 2-DTR, 3-TXD, 4-GND, 5-GND, 6- RXD, 7-DSR, 8-CTS)
• Two USB ports

LEDs

The following table describes the status LEDs used by the TippingPoint 10.
Table 3-1 TippingPoint 10 LEDs
LED
Power
Status
Link
Packet Activity
14 TippingPoint 10 Overview
Location
The right side of the front panel.
The right side of the front panel,
above the Power LED.
The right side of each RJ45 port.
The left side of each RJ45 port.
Description
Green: Indicates that the device has
power and is running.
Off: No power
Yellow: Device is booting OR one of
the following faults has occurred:
• A Critical or Error event in the
system log
• A thermal, memory, or disk alert
• High availability failover status
due to another event
Green: The device is running
normally.
Green: The link on the port is active.
No light: The link is down.
Flashing Yellow: The port is passing
data.
Solid Yellow: Link is present, but
there is no packet activity.
No light: No data is passing.