HP TippingPoint Series Hardware Installation And Safety Manual page 27

To attach the TippingPoint 10 to a rack
If you plan to install the TippingPoint 10 on a rack, follow these steps to attach the ears:
1. Attach the rack mount ears to the server rack with screws.
2. Place the mounting plate containing the TippingPoint 10 on to the rack mount ears with the ear lugs
resting in the attachment holes.
Figure 3-7 Placing the Mounting Plate On the Rack Mount Ears
3. Slide the plate forward to lock it into place on the ear lugs.
Figure 3-8 Locking the Mounting Plate On the Rack Mount Ears
The following figure shows the completed assembly:
Figure 3-9 Mounting Plate Locked On the Rack Mount Ears
TippingPoint 10/110/330 Hardware Installation and Safety Guide 19