A
Connector and Pinout Specifications
This appendix provides connector and pinout information for the TippingPoint system. This appendix
contains the following sections:
• "RJ-45 (COM)
• "RJ-45 Ethernet
RJ-45 (COM) Console
The following figure displays the RJ-45 connector.
Figure A-1
RJ-45 Connector
Table A- 1
shows the RJ-45 console connector pinouts.
Table A-1
RJ-45 Console Connector Pinouts
Pin Number
1
2
3
4
5
6
7
8
RJ-45 Ethernet Connectors
Use the following pinout information when your RJ-45 device is operating in 10Mbps/100Mbps mode.
Table A-2
RJ-45 Ethernet Connector Pinouts
Pin Number
1
2
3
4
5
6
Console" on page 29
Connectors" on page 29
Signal Name
Request to Send (RTS)
Data Terminal Ready (DTR)
Transmit Data (TxD)
Ground (GND)
Ground (GND)
Receive Data (RxD)
Data Set Ready (DSR)
Clear to Send (CTS)
Signal Name
Transmit positive (Tx+)
Transmit negative (Tx-)
Receive positive (Rx+)
Ground (GND)
Ground (GND)
Receive negative (Rx-)
TippingPoint 10/110/330 Hardware Installation and Safety Guide
29