HP TippingPoint Series Hardware Installation And Safety Manual page 38

Table A-2 RJ-45 Ethernet Connector Pinouts
Pin Number
7
8
Use the following pinout information when your RJ-45 device is operating in 1000Mbps (1GbE) mode.
Table A-3 RJ-45 Connector Pinouts
Pin Number
1
2
3
4
5
6
7
8
NOTE: These ports can auto-negotiate their mode and can automatically detect whether they should
operate in straight-through or cross-over mode.
30 Connector and Pinout Specifications
Signal Name
Ground (GND)
Ground (GND)
Signal Name
Twisted Pair 1 positive (TP1+)
Twisted Pair 1 negative (TP1-)
Twisted Pair 2 positive (TP2+)
Twisted Pair 3 positive (TP3+)
Twisted Pair 3 negative (TP3-)
Twisted Pair 2 negative (TP2-)
Twisted Pair 4 positive (TP4+)
Twisted Pair 4 negative (TP4-)