5.5.3
Connectable DRIVE-CLiQ components
Components
As a rule, all SINAMICS components approved for SINUMERIK can be connected using the
DRIVE-CLiQ interface.
Table 5-18
Component
Active/Smart Line Module,
Booksize
Single/Double Motor
Module, Booksize
SMC10/20/30
SME20/25
NX10/15
Further reading
● You will find information about Line Modules and Motor Modules in the SINAMICS S120
● You will find information about Sensor Modules in the SINAMICS S120 Control Units
Guide for the SINUMERIK 840D sl machine configuring
Manual, 07/2006 Edition, 6FC5397-6CP10-0BA0
Components with DRIVE-CLiQ
Booksize Power Units Equipment Manual.
Equipment Manual.
Description
Line Modules provide the central power supply to the DC link.
Motor Modules draw their power from the DC link to supply the
connected motors.
Cabinet-Mounted Sensor Modules are needed when a motor with a
DRIVE-CLiQ interface is not available and when external encoders
are required in addition to the motor encoder.
Measuring systems outside the cabinet can be connected directly to
the Sensor Module External.
Drive expansion module for up to 6 axes
Connection of the Components
5.5 DRIVE-CLiQ Topologies
5-41