Motor Connection; Motor Connection Power Cables - Siemens SINUMERIK 840D sl Manual

5.9

Motor Connection

5.9
5.9.1

Motor Connection Power Cables

Power plugs on the motor with crimp connection for Motor Modules ≤ 30 A
Preassembled Motion Connect power cables should be used in preference to connect
motors to Motor Modules ≤ 30 A. The appropriate module and motor power plugs are
preinstalled on the power cables (cross-section ≤ 10 mm
crimp technology. These cables are primarily used for connection to Motor Modules ≤ 30 A.
Figure 5-25
If the power cable is required, for example, without module-side power connector (e.g. for
simplified installation in trailed cable), this must be specified with the order. The crimp power
connectors to be ordered separately for Motor Modules 3...30 A consist of power connector
(without pin contacts) and additional required pin contacts. The pin contacts are available for
cross-sections 1.5 mm
Figure 5-26
Guide for the SINUMERIK 840D sl machine configuring
Manual, 07/2006 Edition, 6FC5397-6CP10-0BA0
Motor Module - motor connection for Motor Modules ≤ 30 A
, 2.5 mm , 4 mm
2 2
Motor-side power connector
Connection of the Components
). The connection plugs use the
2
, 6 mm and 10 mm .
2 2 2
5.9 Motor Connection
5-63