Structure of the drive group
2.2 Layout of the Components
2.2
Layout of the Components
2.2
2.2.1
Layout and Fastening of the NCU/ NX Modules
Fastening of the NCU 7x0/ NX Modules
For the fastening of the NCU / NX modules, a differentiation is made between fastening
using direct installation, using fastening clip or using spacers.
The fastening of the NX component to the NCU differs depending on whether an NCU 710 or
an NCU 720/730 is used (cooling fins on the rear side of the NCU 720/730).
Fastening Possibilities
Figure 2-6
A (direct to the Line Module)
B (with fastening clip)
C (with spacer)
A (direct to the Line Module)
B (with fastening clip)
C (with spacer)
2-8
NX-NCU fastening types
NCU 720/730
NCU 710
possible
possible
possible
possible
possible
possible
possible
possible
–
possible
possible
possible
Guide for the SINUMERIK 840D sl machine configuring
Manual, 07/2006 Edition, 6FC5397-6CP10-0BA0
NX
NCU 710+NXs
–
possible
possible
NX
NCU 720/730 +NXs
–
–
possible