Checking The Fluid Levels; Product Overview; Controls - Toro Groundsmaster 4100 Operator's Manual

3

Checking the Fluid Levels

No Parts Required
Procedure
1. Check the engine-oil level; refer to
Engine-Oil Level (page
2. Check the hydraulic fluid level; refer to
the Hydraulic Fluid (page
3. Check the cooling system; refer to
Cooling System (page
4. Check the planetary-gear-drive oil; refer to
Checking the Planetary-Gear-Drive Oil (page
70).
5. Check the rear-axle lubricant; refer to
the Rear-Axle Lubricant (page
6. Check the rear-axle-gearbox lubricant; refer
to Checking the Rear-Axle-Gearbox Lubricant
(page 71).
Checking the
63).
Checking
77).
Checking the
73).
Checking
71).

Product Overview

Controls

Note:
Determine the left and right sides of the
machine from the normal operating position.
1. Brake pedal
2. Pedal-locking latch
3. Traction pedal
Traction Pedal
To stop the machine, reduce the amount of foot
pressure that you apply to the traction pedal until the
pedal returns to the N
Brake Pedals
There are 2 foot pedals that operate individual wheel
brakes for turning assistance, parking, and to aid in
better side-hill traction. A latch connects the pedals
for parking-brake operation and transport
Pedal-Locking Latch
The pedal-locking latch connects the pedals together
to engage the parking brake
Tilt-Steering Lever
Press the tilt-steering lever down to tilt the steering
wheel to the desired position, then release the lever
to lock the adjustment
Parking-Brake Latch
A knob on the left side of the console actuates the
parking-brake lock (Figure
16
Figure 3
4. Parking brake
5. Tilt-steering lever
position (Figure
EUTRAL
(Figure
(Figure 3).
(Figure 3).
3).
g203048
3).
3).