Configuration Of Ip Addresses; Ip Address; Configuration Of The System Ip Address - ABB EDS500 Series Function Manual

Ethernet & dsl switches
Hide thumbs Also See for EDS500 Series:
Table of Contents

Advertisement

Functions
Different VLANs are strictly separated from each other in respect to data traffic.
A MAC table contains the assignment between learnt MAC addresses and interfaces. It is
possible to assign an individual MAC table to a VLAN.
The property mac-table can be set to:
– shared
– individual
Up to 16 individual MAC tables can be defined.
The default value for the MAC table is: shared.
When using MSTP (Chapter 2.19.13, "Configuration of Multiple Spanning Tree Parameters")
each MST instance has its own MAC table, that is valid for those VLANs of an MSTI that set
their MAC tables to shared.
Commands to configure VLAN properties
< s e t v l a n { 1 - 4 0 9 4 } a l i a s { s t r i n g 2 0 } >
< s e t v l a n { 1 - 4 0 9 4 } m a c - t a b l e i n d i v i d u a l >
< s e t v l a n { 1 - 4 0 9 4 } m a c - t a b l e s h a r e d >
2.9

Configuration of IP Addresses

To access the EDS500 devices e.g. for network management purposes or to use the device
functions like tunnelling, IEC 60870-5-101 / IEC 60870-5-104 conversion or to use the devices
as IP routers it is necessary to define one or more IP addresses. The devices support the IP
protocol version 4 and 6.
2.9.1

IP Address

The default value for the IP address is: 10.0.0.2.
If several devices are connected to a network without individually changing the IP address it
cannot be predicted which device is reached under the IP address 10.0.0.2.
Property
IP Address
Subnet mask
Gateway IP address
Table 10:
Default values for the IP configuration
2.9.2

Configuration of the System IP Address

The system IP address and corresponding subnet mask can be set with a command. To reach
IP addresses outside one's own subnet a gateway IP address can be set.
The system IP address and system gateway IP address describe a network without VLAN
configuration (frames without VLAN tag and frames without IEEE 802.1p priority tag).
If the system IP address is not used then it should be deactivated. The same applies to the
gateway IP address that remains at 10.0.0.1 without explicit configuration.
1KGT151021 V000 1
Configuration of IP Addresses
Value
10.0.0.2
255.0.0.0
10.0.0.1
29

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents