16.1.12
Grid or frame - CYCLE801
Programming
CYCLE801(REAL _SPCA, REAL _SPCO, REAL _STA, REAL _DIS1, REAL _DIS2,
INT _NUM1, INT _NUM2, INT _VARI, INT _UMODE, REAL _ANG1, REAL _ANG2,
STRING[200] _HIDE, INT _NSP, INT _DMODE)
Parameters
No.
Param Mask Param intern
1
X0
_SPCA
2
Y0
_SPCO
3
α0
_STA
4
L1
_DIS1
5
L2
_DIS2
6
N1
_NUM1
7
N2
_NUM2
8
_VARI
9
_UMODE
10
αX
_ANG1
11
αY
_ANG2
12
_HIDE
13
_NSP
14
_DMODE
Job planning
Programming Manual, 02/2011, 6FC5398-2BP40-1BA0
Explanation
Reference point for position pattern (grid/frame) along the 1st axis (abs)
Reference point for position pattern (grid/frame) along the 2nd axis (abs)
Basic angle of rotation (angle to 1st axis)
< 0 = Clockwise rotation
0 = Counterclockwise rotation
Distance for columns (distance from the 1st axis, enter without sign)
Distance for rows (distance from the 2nd axis, enter without sign)
Number of columns
Number of rows
Machining type
UNITS: Position pattern
0 = Grid
1 = Frame
TENS: Reserved
HUNDREDS: Reserved
Reserved
Shear angle with 1st axis (lines arranged obliquely to the 1st axis)
< 0 = Clockwise measurement (0 to -90 degrees)
> 0 = Counterclockwise measurement (0 to 90 degrees)
Shear angle with 2nd axis (lines arranged obliquely to the 2nd axis)
< 0 = Clockwise measurement (0 to -90 degrees)
> 0 = Counterclockwise measurement (0 to 90 degrees)
Hidden positions
•
max. 198 characters
•
Specification of consecutive position numbers, e.g. "1,3" (positions 1
and 3 are not executed)
Reserved
Display mode
UNITS: Machining plane G17/18/19
0 = Compatibility, the levels effective before cycle call remain active
1 = G17 (only active in the cycle)
2 = G18 (only active in the cycle)
3 = G19 (only active in the cycle)
Programming cycles externally
16.1 Technology cycles
761