Huawei iBattery 3.0 User Manual page 31

iBattery 3.0
User Manual
Figure 3-10 Installing Hall effect sensors (battery string without a neutral wire)
Step 3 Connect the cable between the iBOX and the Hall effect sensors.
 If the battery string is configured with a neutral wire, the currents of the positive and
negative battery string cables need to be detected. If the battery string is not configured
with a neutral wire, only the current of the positive or negative battery string cable needs
to be detected.

If an iBOX manages multiple battery strings, first connect the Hall effect sensors on
battery string 1 respectively to the corresponding ports on the iBOX. Then connect the
Hall effect sensors on battery string 2 to the iBOX in the same way, and so on.

Figure 3-11 Cable connections to Hall effect sensors (1)
Cable Label
Battery1+_HALL1
Issue 07 (2019-12-30)
Battery string with a neutral wire
Copyright © Huawei Technologies Co., Ltd.
iBOX Port
HALL_1
3 Installing Devices
25