Huawei iBattery 3.0 User Manual page 64

iBattery 3.0
User Manual




Procedure
Step 1 Open the Service Expert app and go to the homepage. Select Stock to access the Stock page.
Step 2 Click + in the upper right corner and choose Ibat Collection. On the IBAT Scan page, click
Step 3 Click Save in the upper right corner. The collected information is saved in CSV format and
stored in the BatteryAPP path. Locate the doc that stores iBAT SN and upload it to the
computer.
Step 4 Save sequence numbers of iBATs related to the same iBOX a CSV file according to the
battery sequence numbers.
Step 5 On the iBOX Web page, select System Settings > Parallel Net Join Config, and set Parallel
Net Join Status to Enable.
Step 6 Perform iBAT SN number import to import the iBAT SN information to the corresponding
iBOX.
Do not operate the networking switch during networking. Otherwise, the networking fails.
You need to clear the network parameters for the iBOX, set Parallel Net Join Status to
Enable, and separately press the networking switch for 2 seconds on the iBOX and on the
iBAT for which the network parameters have been cleared when the iBOX network
parameters are cleared, to complete the networking again.
Issue 07 (2019-12-30)
If the RF_Z indicator on the iBOX is not steady green, hold down the networking switch
on the iBOX for 10–20 seconds to clear the original network.
If the RUN/ALM indicator on the iBAT is not steady red, hold down the networking
switch on the iBAT for at least 5 seconds to clear the original network.
For parallel networking, multiple personnel can collect iBAT SN information at the same
time.
The sequence of collecting iBAT SN information needs to be the same as that of battery
numbers.
to collect iBAT SN info.
You can manually enter SN on the Service Expert app to collect the iBAT SN information.
 Save the iBAT information file in CSV format.

It is recommended that the names of CSV files correspond to different iBOXs.

Set Parallel Net Join Status to Enable for all iBOX.
 Ensure that the configured number of batteries is consistent with the number of scanned batteries.
Otherwise, the import fails.
Copyright © Huawei Technologies Co., Ltd.
5 System Commissioning
58