Huawei iBattery 3.0 User Manual page 67

iBattery 3.0
User Manual
Reference No.: Indicates the reference node number corresponding to the operation type.
Example: There are three iBATs in the network and they are numbered 1, 2, and 3. Choose
Delete an iBAT and set Reference No. to 2. After the operation, the network parameters of
the number 2 iBAT are cleared, and the iBAT number 3 changes to 2.
Figure 5-23 Schematic diagram
Replacing iBATs in Batches
Figure 5-24 Replacing iBATs in batches
Start No.: Indicates the start reference number corresponding to the operation type
Batch-replace iBAT.
End No.: Indicates the end reference number corresponding to the operation type
Batch-replace iBAT.
Example: There are six iBATs in the network and they are numbered 1, 2, 3, 4, 5, and 6.
Choose Batch-replace iBAT, set Start No. to 2, and set End No. to 5. After the operation, the
network parameters of the number 2–5 iBATs are cleared, and numbers 2–5 are reserved.
Figure 5-25 Schematic diagram
Issue 07 (2019-12-30) Copyright © Huawei Technologies Co., Ltd.
5 System Commissioning
61