Huawei iBattery 3.0 User Manual page 58

iBattery 3.0
User Manual
Batt. String Config
Current acquisition
source
Battery N line
Single batt. group
number of HALL
Single batt. capacity
Batt. installation time
iBAT number of
iBOX
Number of battery
strings
Batt. string No.
2.
Issue 07 (2019-12-30)
Figure 5-10 Batt. String Config
Description
The actual specifications of the Hall effect sensor prevail.
Set whether there is a battery N wire according to the actual
situation.
Indicates the number of Hall effect sensors connected to a single
battery string.
Specifies the capacity of each battery that is connected in the
battery string in series.
Time when the battery is installed for the first time. Does not need
to be reset when part of batteries are replaced.
Indicates the total number of iBATs managed by the iBOX.
Indicates the total number of battery strings managed by the iBOX.
Sets the battery string numbers of the iBOXs connected in parallel
to unique ones when multiple iBOXs are connected in parallel.
On the iBOX WebUI, choose System Settings > Running Parameter, and set Running
Parameter.
Figure 5-11 Running Parameter
Copyright © Huawei Technologies Co., Ltd.
5 System Commissioning
52