Huawei iBattery 3.0 User Manual page 66

iBattery 3.0
User Manual
Figure 5-19 Schematic diagram
Replacing an iBAT
Figure 5-20 Replacing an iBAT
Reference No.: Indicates the reference node number corresponding to the operation type.
Example: There are three iBATs in the network and they are numbered 1, 2, and 3. Choose
Replace an iBAT and set Reference No. to 2. After the operation, the network parameters of
the number 2 iBAT are cleared, and number 2 is reserved.
Figure 5-21 Schematic diagram
Deleting an iBAT
Figure 5-22 Deleting an iBAT
Issue 07 (2019-12-30) Copyright © Huawei Technologies Co., Ltd.
5 System Commissioning
60