Panasonic EP-MA03 Service Manual page 38

5. Remove the snap pin from the Ottoman lift unit, and
detach the lift pin.
Caution:
• Support the Ottoman when removing the pins to prevent
the Ottoman from dropping and potentially causing
injury.
• During assembly, insert the lift pin in the direction of the
arrow, then fix the snap pin in place.
6. Cut three cable ties fixing the hoses in place and one
cable tie fixing the connector wire in place. Remove three
hoses and one connector.
7. Detach the Ottoman from the main unit.
8. Remove four screws fixing the cover to the underside of
the Ottoman, and remove the cover.
Caution:
• During assembly, ensure that the hoses are fed through
the holes in the order (from left to right) of black, orange,
grey, then black (thin). The alignment of the hoses can-
not be altered once fed through the holes.
9. Remove one screw fixed to the heater connector cord,
and cut one cable tie fixing the foot heater hose in place.
38