Figure 4-19 Logical Ethernet Output Port Menu - Motorola OM 1000 Installation And Operation Manual

5
Select MPEG/UDP and enter the desired number of MPEG packets per UDP packet to be
transmitted.
6
After all changes are made, select UP to return to the logical Ethernet output port menu.
7
Select COMMIT to commit all changes to the OM 1000 database. To save the changes to
flash memory, select SAVE from the ADMIN menu. The OM 1000 must be rebooted for
these changes to take effect.
Figure 4-19
Logical Ethernet output port menu
A
E F
Table 4-14 describes the fields and available options:
Table 4-14
Logical Ethernet output port menu options
Key Field Options
A PORT nn 1
through
16
B
INTFC
0
1
2
3
4
5
6
7
C LCKD
UNLCKD
D
OFF
IN
OUT
E UP
F MORE
G DST-UDP
B
G
Description
Sets the logical output port.
Selects the physical input port.
NOT USED
CONSOLE
RS232_9
ETHERNET
UNEQPD or RS530 or RS232-25 (hardware configuration dependent)
UNEQPD or RS530 or RS232-25 (hardware configuration dependent)
MOD
PID GEN
Sets the port to the locked (disabled) or unlocked (enabled) position.
Selects the port mode.
Select IN to configure a port to receive data.
Select OUT to configure a port to transmit data.
Displays the previous menu.
Displays the logical Ethernet destination IP address menu.
Sets the destination UDP port number.
Setup and Operation
C
H
OM 1000 Installation and Operation Manual
4-29
D