Motorola OM 1000 Installation And Operation Manual page 91

C-10 Initialization Information
OM1000.INI*
OM1000.MSG
OM1000.SNM*
OM1000.SVC*
OM1000.TSK
The following gives more detail about the files shown above that may require site specific
configuration.
OM 1000. FO F
OM 1000. GT W
OM 1000. HS T
OM 1000. IN I
-1 for the remaining field(s).
OM 1000 Installation and Operation Manual
OM-1000 Dynamic Database Configuration.
OM-1000 Message Queue Configuration.
OM-1000 Service Names.
Services file.
OM-1000 Task Configuration.
The file name and path for the unit specific om1
must be set. Make no other changes.
c: /boot di r/om10 00 /03_0 4.000/om001.ini /confi
The IP address and host name any network gateways to be used
the OM-1000 must be entered.
header.
The OM-1000 requires IP address and host name for the associa
control device (usually an ACC-4000D) to be present in this
file. Format is shown in the file's header.
The Emergency Alert Broadcast Port must be speci
the OM-1000 logical port used for EA. Example:
[Emergency Broadcast Port]
EBSLogicalPort = 3;
where: 3 is the logical port number that the emergency
The Emergency Alert Broadcast PIDs must be specified. Example:
[Emergency Broadcast PID to Block]
EBSPidToBlock = 5379;
[Emergency Broadcast PID to Block]
EBSPidToBlock2 = 5372;
.
.
.
----
wh ere: 5379 (1503 hex) is the emergency broadcast PID.
If the Multicast Receive capability is to be activated, the
Multicast Receive MAC address must be specified. Example:
[Physical Port Configuration]
PhysicalTable =
#Group 1
2 0 0 0 0 0 0 0 0 0 0 0 0
#Group 2
Used by the ACC-4000D.
Example:
g/config.ini
---------
Format is shown in the file's
-
broadcast PID is expected.
If less than 4 PIDs are to be blocked, put in
000.ini file
by
ted
fied. This is