Cab Maintenance
Cleaning the Cab
Important:
Use care around the cab seals and
lights
(Figure
52). If you are using a pressure
washer, keep the washer wand at least 0.6 m (2 ft)
away from the machine. Do not use the pressure
washer directly on the cab seals and lights or
under the rear overhang.
Figure 52
1. Seal
2. Light
Filling the Washer-Fluid
Bottle
1.
Perform the pre-maintenance procedure; refer
to
Preparing the Machine for Maintenance (page
34).
2.
Open the hood and locate the washer-fluid bottle
(Figure
53).
g034330
3. Keep wand 0.6 m (2 ft)
away.
4. Do not pressure-wash
under the rear overhang.
Washer-Fluid Bottle with Washer-Fluid Symbol
3.
Fill the bottle with washer fluid as needed.
4.
Close the hood.
Cleaning the Cab Air Filters
Service Interval: Every 250 hours
1.
Remove the screws and grates from both the
in-cab and rear cab air filters
Figure
55).
1. Filter
2. Grate
52
Figure 53
(Figure 54
Figure 54
In-Cab Air Filter
3. Screw
g028438
and
g028378