Slide The System Into The Cabinet; Verifying Successful Disk Replacement From The Acm - Dell EMC Integrated Data Protection Appliance DP4400 Service Manual

Remove and replace assemblies

Slide the system into the cabinet

Verifying successful disk replacement from the ACM

Dell EMC Integrated Data Protection Appliance DP4400 2.4 Service Procedures Guide
30
Figure 16 Install System cover
Procedure
1. At the front of the cabinet, push the system inward until the lock levers click
into place.
2. Push the blue slide release lock tabs forward on both rails and slide the system
into the cabinet. The slam latches will engage to secure the system in the
cabinet.
Figure 17 Slide the system into the cabinet
After a disk is replaced, you can run the FRU command line verification from the ACM
to ensure that the replacement was successful.
Procedure
1. Log in to the ACM command line by using SSH.
Use for the user, and use the common password for the appliance.
root