Siemens SINAMICS S120 Manual page 38

9 Trouble Shooting Tips
4. Did you parameterize the Generic Ethernet Module correctly? Check Section
on Generic Ethernet Module to be sure.
a. Do you have the "Comm. Format" set to Data –INT, or accidentally set
b. Do the Connection Parameters (addresses and length) match the drive
5. Could it be a bad Ethernet cable?
6. Are there faults on the drive?
a. Check LED's status on the drive
b. Check diagnostics on drive for faults.
7. Are all Drive Enables (OFF1/OFF2/OFF3) enabled?
SINAMICS S: Speed control of a S120 with an Allen-Bradley controller
(Compact/ ControlLogix with RSLogix 5000) via EtherNet/IP
Entry-ID: 92045369, V4.0,
to Data-DINT?
telegram?
.
08/2018
38