Hitachi SH7760 Solution Engine2 Overview page 5

Safety Instructions
• Read this page carefully and keep in mind the instructions before using T-Engine.
!
CAUTION
WARNING
!
!
CAUTION
• If smoke or abnormal smell arises from the board, stop using Solution Engine2, disconnect the AC adapter immediately
from the receptacle and turn off Solution Engine2.
• Don't disassemble or modify Solution Engien2 to avoid a risk of high-voltage electric shock or fire.
• Don't drop water or liquids onto Solution Engine2 to avoid a risk of electric shock or fire. When water or liquid is
dropped onto the board, disconnect the AC adapter immediately from the receptacle, and wipe it with a soft cloth to avoid a
risk of electric shock or fire.
• Don't fall objects (line or solder scrap) onto Solution Engine2. If an object is dropped into it, disconnect the AC adapter
immediately from the receptacle, turn off Solution Emgine2, and remove the object from the inside of the board to avoid a
risk of electric shock or fire.
• Use a dedicated AC adapter that comes standard with Solution Engine2 to avoid a risk of electric shock, abnormal heat or
fire.
• Don't use inflammable liquids (alcohol, benzine or thinner) for cleaning the board to avoid a risk of fire.
• Don't place a heavy item on the AC adapter cord. To avoid a risk of electric leakage, fire or electric shock, don't allow the
AC adapter cord to be damaged or modified.
• Don't unplug the AC adapter cord with wet hand to avoid a risk of electric shock. When unplugging the cord, grasp and
pull the plug instead of the cord. Don't pull the AC adapter cord to avoid a risk of cord damage, electric shock or fire.
If ignored, there is a risk of death or heavy injury.
If ignored, there is a risk of injury or equipment damage.
2