Toshiba Adjustable Speed Drive H3 Operation Manual page 36

GROUP:FUNDAMENTAL PARAMETERS #1
LIQUID CRYSTAL DISPLAY
MAXIMUM OUTPUT
FREQUENCY
BASE FREQUENCY #1
BASE FREQUENCY
VOLTAGE SELECT
MAXIMUM OUTPUT
VOLTAGE #1
REVERSE OPERATION
DISABLE SELECT
UPPER LIMIT
FREQUENCY
LOWER LIMIT
FREQUENCY
VOLTS PER HERTZ
PATTERN
VOLTAGE BOOST #1
ACCELERATION TIME #1
DECELERATION TIME #1
ACC/DEC PATTERN #1
SELECTION
ACCEL/DECEL PATTERN
ADJUST LOW
ACCEL/DECEL PATTERN
ADJUST HIGH
*Item 9 is available only when Item 8 Adjustment Range option 1 or 2 is selected.
TOSHIBA
ITEM PARAMETER
NO. DESCRIPTION
1 Maximum frequency
2 Base frequency #1
3 Base frequency voltage selection
4 Maximum voltage #1 for 230V
Maximum voltage #1 for 460V
5 Reverse operation disable selection 0: Reverse allowed
6 Upper limit frequency
7 Lower limit frequency
8 V/F pattern
9 * 30 HP and less
40 HP and greater
10 60 HP and less
75 HP and greater
11 60 HP and less
75 HP and greater
12 Acc/Dec pattern #1
13 Acc/Dec pattern adjustment
amounts (low)
14 Acc/Dec pattern adjustment
amounts (high)
8 - 1
DISPLAY
ADJUSTMENT
RESOLUTION
RANGE
30 - 400 Hz 0.01/0.1 Hz
25 - 400 Hz 0.01/0.1 Hz
0: Input voltage level -
1: Automatic setting
2: Stationary setting
0 - 255V 1V
0 - 510V 1V
-
1: Reverse not
allowed
0.0 Hz - Maximum 0.01/0.1 Hz
Output Frequency
0.0 Hz - Upper 0.01/0.1 Hz
Limit Frequency
1: Constant torque * -
2: Variable torque *
3: Automatic torque
boost
4: Automatic torque
boost with
automatic energy
savings feature
5: Vector control
6: Vector control with
automatic energy
savings feature
0 - 30% 0.1%
0.1-6000/0.01-600.0 0.1s/0.01s
0.1-6000/0.01-600.0 0.1s/0.01s
0: Linear -
1: Self-adjusting
2: S-Pattern
3: Overspeed Pattern
0 - 50 1%
0 - 50 1%
FACTORY PAGE
SETTING NO.
80 Hz 9-3
60 Hz 9-3
1 9-3
230V 9-3
460V 9-3
0 9-3
80.0 9-3
0.0 9-3
1 9-3
3% 9-4
1%
10 sec 9-4
60 sec
10 sec 9-4
60 sec
0 9-4
25 9-5
25 9-5