EPSON Stylus COLOR 900/900N
Chapter 5 Adjustments
5.2.7 Cleaning the Printhead
You see the maintenance menu:
If your printouts have problems like white banding, color banding, or
missing dots, the printhead may need to be cleaned. You can clean the
printhead either by using the adjustment program or the printer's control
"Cleaning the Printhead"
panel (see
on page 156). When you use the
adjustment program, the printer always performs CL2, the strongest
cleaning cycle.
Follow these steps:
"Starting the Adjustment
1. Perform the actions described in
Program"
on page 122. You see the main menu:
Figure 5-36. Maintenance Menu
3. Select Head Cleaning. You see the cleaning screen:
Table 5-10. Main Menu
2. Select Maintenance.
Figure 5-37. Cleaning Screen
143