EPSON Stylus COLOR 900/900N
5.2.8 Initial Ink Charge
You need to perform the initial ink charge after replacing the printhead.
You can also use it to unclog printhead nozzles that couldn't be cleared
using the normal cleaning sequence.
1. Before performing the initial ink charge, replace the old ink
cartridges with new ones. (If ink runs out during the operation, the
initial ink charge cannot be completed and starts over when you
install new cartridges.) To replace the ink cartridges, see
"Replacing the Ink Cartridges"
2. Perform the actions described in
Program"
on page 122. You see the main menu:
Table 5-12. Main Menu
3. Select Maintenance.
on page 154.
"Starting the Adjustment
You see the maintenance menu:
Figure 5-38. Maintenance Menu
4. Select Ink Charge Flag Reset. You're prompted to reset the ink
charge flag:
Figure 5-39. Prompt to Reset Ink Charge Flag
5. Select Yes.
Chapter 5 Adjustments
145