Epson Stylus COLOR 900 Service Manual page 76

EPSON Stylus COLOR 900/900N
3.1.1.4 Remedies for the Maintenance Error
When the printer displays the Maintenance Error, the waste ink pads
are full of ink. Replace the waste ink pads with new ones by following
the steps in "Upper Case and Control Panel Removal"
remove the upper case. Then remove the screws shown in
to access the waste ink pads. Replace the pads with new ones, and
then clear the waste ink counter by either of the two following methods:
Y
From the control panel
1. Turn the printer on while pressing the Load/Eject and Cleaning
buttons. The Paper Out light starts to blink.
2. Press the Cleaning button for ten seconds. The waste ink counter is
reset when both Ink Out lights and the Paper Out light are blinking.
3. Turn the printer off.
Y
Using the adjustment program
See "Checking and Clearing the Waste Ink Counter"
on page 91 to
Figure 4-6
on page 146.
Chapter 3 Troubleshooting
73