Fujitsu GW1500 Getting Started Manual page 16

GW1500 Getting Started Guide
Details on the lamps are shown below.
Lamp
Lamp
Name
Color
-
Green
STATUS
Red
Amber
-
Green
SERVICE
Red
-
SECURE
Blue
Attention!
The STATUS lamp and the SERVICE lamp turn on to red or amber immediately
after the device is activated, but this is not a malfunction. The STATUS lamp
blinks green and then turned on. This indicates that the device is activated
properly. If the STATUS lamp does not change to green after five minutes, there
Status
Off Indicates that the power is not turned on.
Indicates that the device is operating
On
normally.
Indicates that the device is being reset to
Blinking
the factory default settings.
Indicates that an error occurred in the
On
device.
On Indicates the software status.
Indicates that the device is not connected
Off
to the center.
Indicates that the device is acquiring
Blinking
configuration definitions from the center.
Indicates that the configuration definitions
On
have been reflected.
Indicates that the device is being reset to
Blinking
the factory default settings.
Indicates that the IP address is being
On
initialized.
Indicates that the SSL-VPN connection or
Off
private PPP connection is not established.
SSL-VPN connection or private PPP
Blinking connection (download connection
unavailable)
SSL-VPN connection or private PPP
On connection (two-way communication
available)
16
Display Conditions Remarks
-
-
Blinks
simultaneously
with the
SERVICE
lamp.
-
Check the
system log for
the status.
-
-
-
Blinks
simultaneously
with the
STATUS lamp.
-
-
-
-
Chapter 1 Overview