GW1500 Getting Started Guide
Chapter 2
This chapter describes the installation process and conditions for installing this device.
2.1
Checking the Installation
Environment
Check the following points before installation:
- All package contents listed in
included with the device.
- The cable that is connected to each interface connector should be compatible with the
connecting interfaces.
Warning
Never insert anything into an interface connector except for a connector of
the compliant circuit. Damage and/or device failure, or electrical shock may
occur.
For details on the package contents, refer to
page
13.
Tips
2.1.1
Checking the Installation Conditions
Ensure the following environment to install the device.
Caution
Follow the conditional rules below to install the device. Using the device in
an environment other than these conditions may cause failures.
Device Installation
"1.1.1 Package Contents" on page 13
19
in this manual are
"1.1.1 Package Contents" on
Chapter 2 Device Installation