Confirming The Area For Installation (And Maintenance) - Fujitsu GW1500 Getting Started Manual

GW1500 Getting Started Guide
Checklist
Use the following checklist to confirm that the conditions are met.
Nothing is placed on the device.
The device is not placed vertically.
The device is not installed in a location where there is direct sunlight, near a
heater, or in a location with large amounts of humidity or dust.
The device is not installed in an unstable location such as a location with
excessive vibration or one that is slanted.
I (the user) have read
2.1.2 Confirming the Area for Installation (and
Maintenance)
Ensure that you have enough area to perform installation or maintenance for the device
as follows:
- Front: Ensure that there is enough area to allow you to confirm the status of the lamps
and to install the device.
- Rear: Ensure that there is enough area to allow you to insert and remove connectors.
- <Table-Top Installation> Without a Mobile Adapter
30
Installation Area
Contents to Check
" Safety Precautions" on page 6
100
50
10
(Unit: mm)
22
in this manual.
100
50
30
Maintenance Area
Chapter 2 Device Installation
Check Result
50
(Unit: mm)