Turning The Device Power On - Fujitsu GW1500 Getting Started Manual

GW1500 Getting Started Guide
<View from the Rear>
The device LAN port supports the Auto-Negotiation function. By enabling the
Auto-Negotiation function for the connected computer, the connection is
Tips
automatically established at the maximum supported speed (a maximum of 100
Mbps in full duplex mode).
3.2

Turning the Device Power On

Power on the device after connecting the device to the setup computer.
[Operation Procedure]
1. Insert the plug of the included DC cord into the power connector on the rear of
the device. Or insert the plug of the AC adapter (option).
2. To prevent the DC cord or AC adapter from being pulled out, fasten it through
the nylon clip.
<View from the Rear>
33 Chapter 3 Device Settings