Huawei PowerCube 5000 User Manual page 77

PowerCube 5000
User Manual (SmartLi 100Ah)




Procedure
Step 1 Remove filler panels from the cabinet based on the actual number of ESMs.
Figure 3-15 Removing a filler panel
Step 2 To facilitate battery installation, install the auxiliary support on the cabinet first.
Issue 02 (2020-03-17)
Before installing batteries, carefully read the battery safety precautions.
Wear insulation gloves and use insulated tools during installation.
Place the batteries in a correct way to prevent vibrations and shocks.
When installing batteries, ensure that the load-bearing capacity of the floor in the
installation area is sufficient. Install additional supports if required.
Copyright © Huawei Technologies Co., Ltd.
3 Installation
69