Fujitsu PRIMERGY CX400 M4 Operating Manual page 65

– After power failure
The server node automatically reboots following a power failure (depending
on the settings in the BIOS or in iRMC S5).
– Power button override
The server node can be switched off (hard power off) by holding down the
On/Off button (approximately 4 - 5 seconds).
V
CAUTION!
There is a risk that data may be lost.
– iRMC
iRMC offers various options for switching the server on and off, e.g. via the
System power button on the Global icons of the iRMC web interface.
V
CAUTION when switching off the power!
The operation of the power switch can be specified as "Do Nothing",
"Stand by", "Hibernate", and "Shutdown" depending on the OS settings.
The default is "Shutdown".
On the server node, functions corresponding to "Stand by" and
"Hibernate" are not supported as BIOS and hardware functions.
For more information about operating mode settings, see the manual
supplied with the OS.
CX400 M4
Operating Manual
Operation
65