D-Link DAP-1155 User Manual page 113

DAP-1155 Wireless N150 Access Point & Router
User Manual
To configure the access point as a client, select the Enable client checkbox. When the checkbox is
selected, the following fields are displayed on the page:
Parameter
Broadcast wireless
network
SSID
BSSID
Network Authentication
When the Open or Shared authentication type is selected, the following fields are available:
Parameter
Enable Encryption WEP
Default Key ID
Encryption Key WEP
as HEX
WEP key length
Encryption Key WEP (1-
4)
If the checkbox is not selected, devices cannot connect to the access
point's WLAN. Upon that DAP-1155 can connect to another access
point as a wireless client.
Wireless network settings
The name of the network to which the access point connects.
The unique identifier of the network to which the access point
connects.
The authentication type of the network to which the access point
connects.
The checkbox activating WEP encryption. When the checkbox is
selected, the Default Key ID field, the Encryption Key WEP as
HEX checkbox, the WEP key length drop-down list, and four
Encryption Key WEP fields are displayed on the page. For the
Shared authentication type the checkbox is always selected.
The number of the key (from first to fourth) which will be used for
WEP encryption.
Select the checkbox to set a hexadecimal number as a key for
encryption.
The length of WEP encryption key.
Select the value 64bit to specify keys containing 5 ASCII symbols
or 10 HEX symbols.
Select the value 128bit to specify keys containing 13 ASCII
symbols or 26 HEX symbols.
Keys for WEP encryption. The access point uses the key selected
from the Default Key ID drop-down list. It is required to specify
all the fields.
Page 113 of 158
Description
Description
Configuring Device