Configuring Iptv - D-Link DAP-1155 User Manual

DAP-1155 Wireless N150 Access Point & Router
User Manual

Configuring IPTV

On the page, you can configure the access point to use an IPTV set-top box.
Figure 42. Configuring the LAN port to connect an IPTV set-top box.
On the opened page, select the LAN1 value.
If in the future you need to disconnect your IPTV set-top box from the LAN port and connect to it a
computer, start the IPTV settings wizard (for the detailed description of the Wizard, see the
IPTV Settings Wizard section, page 63).
If for accessing the Internet and IPTV services your ISP uses virtual local area networks with
identifiers (VLAN ID), to configure access to the IPTV service, proceed to the Advanced / VLAN
page, create a group of ports with the required value of the VLAN ID parameter, the Bridge type,
and the LAN port (see the VLAN section, page 116, for a detailed description of the elements from
the page).
Click the Next button to continue.
Click the Skip to next button in order not to apply the IPTV settings.
Click the Apply button to save the specified settings.
After clicking the Apply button, the Home / Information
Page 54 of 158
page opens.
Configuring Device