Configuration - D-Link DAP-1155 User Manual

DAP-1155 Wireless N150 Access Point & Router
User Manual

Configuration

On the System / Configuration page, you can reboot the device, save the changed settings to the
non-volatile memory, restore the factory defaults, backup the current configuration, or restore the
access point's configuration from a previously created file.
The following buttons are available on the page:
Control
Save
Reboot
Factory
Backup
Figure 113. The System / Configuration page.
Click the button to save settings to the non-volatile memory. Please,
save settings every time you change the device's parameters.
Otherwise the changes will be lost upon hardware reboot of the
access point.
Click the button to reboot the device. All unsaved changes will be
lost after the device's reboot.
Click the button to restore the factory default settings. Also you can
restore the factory defaults via the hardware WPS/RESET button
(see the Back Panel section, page 10).
Click the button to save the configuration (all settings of the access
point) to your PC. The configuration backup will be stored in the
download location of your web browser.
Page 144 of 158
Description
Configuring Device