Menu Sections - D-Link DAP-1155 User Manual

DAP-1155 Wireless N150 Access Point & Router
User Manual
The Home / Information page displays general information on the access point and its software.
From the page you can quickly get to some pages of the web-based interface.
To upgrade the firmware of the access point, left-click the current firmware version (the right
column of the Firmware version line) and follow the dialog box appeared.
To contact the technical support group (to send an e-mail), left-click the support e-mail address (the
right column of the Support line). After clicking the line, the e-mail client window for sending a
new letter to the specified address opens.
To edit the access point's local interface parameters, left-click the IP or MAC address of the local
interface (the right column of the lines LAN IP or LAN MAC correspondingly). After clicking the
line, the page for editing the LAN interface opens (for the detailed description of the page, see the
LAN section, page 92).
To configure the device's WLAN basic parameters, left-click the SSID of the WLAN (the right
column of the SSID line). After clicking the line, the Wi-Fi / Basic settings page opens (for the
detailed description of the page, see the Basic Settings section, page 94).
To configure security settings of the WLAN, left-click the network authentication type (the right
column of the Security line). After clicking the line, the Wi-Fi / Security settings page opens
(for the detailed description of the page, see the Security Settings section, page 96).

Menu Sections

To configure the access point use the menu in the left part of the page.
The Monitoring section provides an interactive scheme which illustrates the access point's settings
and the LAN structure.
In the Home section you can run the needed Wizard.
To configure connection to the Internet, go to the Click'n'Connect page (for the detailed
description of the Wizard, see the Click'n'Connect section, page 35).
To configure the access point's wireless network, go to the Wireless network settings wizard
page (for the detailed description of the Wizard, see the Wireless Network Settings Wizard section,
page 55).
To configure access from the Internet to a web server located in your LAN, go to the Virtual
server settings wizard page (for the detailed description of the Wizard, see the Virtual Server
Settings Wizard section, page 61).
To configure the device to use an IPTV set-top box, go to the IPTV settings wizard page (for the
detailed description of the Wizard, see the IPTV Settings Wizard section, page 63).
The pages of the Status section display data on the current state of the access point (for the
description of the pages, see the Status section, page 64).
The pages of the Net section are designed for configuring basic parameters of the LAN interface of
the access point and creating a connection to the Internet (for the description of the pages, see the
Net section, page 70).
The pages of the Wi-Fi section are designed for specifying all needed settings of the device's
wireless network (for the description of the pages, see the Wi-Fi section, page 94).
Page 27 of 158
Installation and Connection