Pptp + Static Ip Or L2Tp + Static Ip Connection - D-Link DAP-1155 User Manual

DAP-1155 Wireless N150 Access Point & Router
User Manual

PPTP + Static IP or L2TP + Static IP Connection

Fill in the IP Address and Netmask fields.
In the Gateway IP address field, enter the IP address of the gateway used by this WAN
connection.
In the Primary DNS server field, enter the address of the primary DNS server.
As a rule, the specified settings are enough to configure a non-protected connection of the selected
type. If you need to specify additional settings, open the expert settings mode. To do this, use the
switch in the bottom left corner of the page (for a detailed description of all the connection's
parameters, see the Creating PPTP/L2TP + Static IP or PPTP/L2TP + Dynamic IP WAN
Connection section, page 85).
Click the Next button to continue.
Figure 33. Configuring PPTP + Static IP WAN connection.
Page 45 of 158
Configuring Device