Precautions For Safety - NEC N8104-123A User Manual

x

Precautions for Safety

This section provides precautions for using this product safely. Read this section carefully to ensure proper
and safe use of the server. For symbol meanings, see "Safety Indications"
General Precautions
Do not use the product for services where critical high availability may
directly affect human lives.
The product is not intended to be used with or control facilities or devices concerning
human lives, including medical devices, nuclear facilities and devices, aeronautics and
space devices, transportation facilities and devices; and facilities and devices requiring
high reliability. NEC assumes no liability for any accident resulting in personal injury,
death, or property damage if the product has been used in the above conditions.
Do not continue to use the equipment if you detect smoke, odor, or
noise
If the equipment emits smoke, odor, or noise, immediately unplug the power cord of Blade
Enclosure. Then, contact your service representative. Continuing to use the product in
such condition may cause a fire.
Do not insert a wire or metal object
Do not insert a wire or metal object into this product.
There is a risk of an electric shock.
Avoid direct look into the laser beam.
The N8104-123A 10GBASE-SR Adapter is classified as a Class 1 Laser Product. A class
1 laser will not be harmful to the human body. However, do not look directly into the LAN
port during operation. Keep any vacant LC connector covered with a dust cover (rubber
cap) when you do not use it or you transport it.
ご使用上の注意/Precautions For Use
Keep water or foreign matter away from the equipment.
Do not let any form of liquid (water etc.) or foreign matter (e.g., pins or paper clips) enter
the equipment. Failure to follow this warning may cause an electric shock, a fire, or a
failure of the equipment. When such things accidentally enter the equipment, immediately
turn off the power of Blade Enclosure and unplug the power cord. Then, contact your
service representative.