Table of Contents
Advertisement
xii
Precautions for Cleaning and Handling of Internal
Devices
Do not disassemble, repair, or modify the product yourself
Do not disassemble, repair, or modify this product. Doing so may cause an electrical
shock or a fire. Do not put the product close to fire, or immerse it in water. Doing so may
cause an explosion. If the product does not function normally, contact your service
representative.
ご使用上の注意/Precautions For Use
Unplug the power
Turn off and unplug the power before removing the computer's cover. Failure to do so
could endanger you and may damage the adapter or computer
Ground yourself to dissipate any static charge before handling the
adapter.
To prevent any damage on components due to static electricity, make sure to discharge
static electricity from yourself before you touch N8104-123A adapter.
Don't touch uncoated metal parts on adapter.
Never touch N8104-123A adapter's LAN port, terminals of components or uncoated metal
parts on adapter. Otherwise, taint, erosion or others may cause loose connection. Do
not touch this product with wet or dirty hands.
Excessive force could break the connector.
On installing this adapter, do not insert it by force. Otherwise, N8104-123A adapter and
the server may be damaged.
Don't touch the tip of bracket to other parts of server
When you insert N8104-123A adapter into expansion slot, be careful not to touch the tip
of bracket to other parts of server (such as other components or board). Otherwise, they
may be damaged.
Firmly connect the network cable
When connecting the cable, insert the cable connector until you hear a click sound.
Advertisement
Table of Contents
