NEC Express5800 Series Maintenance Manual page 135

Chapter 3 Appendix
BMC Message on Lower LCD Line
CPU2-DIMM4 Uncorrectable
Error
CPU2-DIMM5 Uncorrectable
Error
CPU2-DIMM6 Uncorrectable
Error
Processor1 Internal Error
Processor2 Internal Error
Sensor Failure Detected.
SMI timeout
IPMI Watchdog timer timeout
(Power off)
Node Manager Firmware Image
execution Failed
Node Manager Firmware Flash
Erase Error
Node Manager Firmware Flash
Corrupted
Node Manager Internal Error
Node Manager can't
communicate BMC
Node Manager Manufacturing
Error
Node Manager Persistent
Storage Integrity Error
Drive 0 Fault
Drive 1 Fault
Drive 2 Fault
Drive 3 Fault
Drive 4 Fault
Drive 5 Fault
Drive 6 Fault
Drive 7 Fault
Cause
An uncorrectable error occurred
for CPU2-DIMM4.
An unrecoverable error occurred
for CPU2-DIMM5.
An unrecoverable error occurred
for CPU2-DIMM6.
An internal error (IERR) occurred
on CPU1.
An internal error (IERR) occurred
on CPU2.
Abnormality in a sensor was
detected.
A timeout occurred while
servicing system management
interrupts.
A watchdog timer timeout
occurred.
Abnormality in INTEL(R) Node
Manager which is the function of
the part of EXPRESSCOPE
ENGINE3 occurred.
Operation was performed during
hard disk drive failure
Express5800/E120d-1 Maintenance Guide
1. POST Error Message
Solution
Contact your sales representative.
Turn off the power, wait for about 30
seconds, and restart the server. If this
does not resolve the problem, contact
your sales representative.
Contact your sales representative and
request repairs.
(3/4)
135