Advertisement
Installation Reference
Optional: Installing an OAU 2F on an XMC-2H ODU (11GHz)
1
Installing the joining kit on an XMC ODU.
Installing a Ground Cable for the OAU 2F
To the ground bar
Pay attention to the installation directions of OT terminals.
Install the ground cable on
the device side under the
tower.
XMC-2H ODU
(11GHz)
Joining kit
Installing an IF Cable
Conversion
bracket
To the ground bar
Remove the antirust paint and
other coating from the ground point.
After the connection is completed,
take anti-rust and waterproof
measures.
13
2
Install the joining kit with the
XMC ODU to an OAU 2F.
To the XMC ODU
Do not remove or insert the IF cable connector on
the OAU 2F during power-on. Otherwise, personal
injury may occur.
OAU 2F
Conversion
bracket
To the XMC ODU
First connect the IF cable and then power on the
device. It is recommended that the conversion
bracket be used for installing IF cables according to
the actual requirements.
For details about how to prepare and route IF cables,
see RTN XMC ODU Quick Installation Guide.
Advertisement
