Advertisement
Installation Reference
Installing the Outdoor Optical Splitter
c
Guide the lead nylon of outdoor fibers through fiber
fixing holes, fix the lead nylon and cut off redundant
part.
d
Use hose clamps to fix outdoor fibers on the
appropriate hooks.
g
Wrap outdoor fibers with three layers of waterproof tapes and ensure that the tapes
just fit the cable trough and the case is reliably sealed and waterproofed.
Sealing
positions
When wrapping outdoor fibers, do not pull waterproof tapes.
Three layers of
waterproof
tapes
e
Remove dustproof caps and insert fiber connectors into appropriate adapters
according to labels.
Port in Fiber
Distribution
Area
101
201
102
202
IN2
IN1
Schematic diagram of coding ports and fibers in fiber distribution area
f
Fix the fiber metal jacket in the fiber routing clips.
Close the case
cover.
6
4 mm hex key
Reliably tighten the reinforce screws to ensure waterproof effects.
20
Interconne
Description
cted GE
Port
Main OAU
Connected to GE receive port on the main OAU 2F
2F
Connected to GE transmit port on the main OAU 2F
Standby
Connected to GE receive port on the standby OAU 2F
OAU 2F
Connected to GE transmit port on the standby OAU 2F
Customer
Connected to GE receive port on the customer equipment
equipment
Connected to GE transmit port on the customer equipment
Main OAU 2F
Standby OAU 2F
Customer
equipment
Advertisement
