HP A10500 Series Manual page 16

Figure 5 Right slide rail
(1) Signs
Table 15 Description of signs on the slide rails
Sign Meaning
F/L Front end of the left slide rail
F/R Front end of the right slide rail
Mark the position on the rack for installing the slide rail.
2.
x
Make sure the bottom edge of the slide rail aligns with the middle of the narrower metal area
between holes, as shown in
x
Each rack post requires six screws to fix the slide rail. You only need to mark the uppermost square
hole and lowermost square hole for installation.
x
Mark the square holes at the same height on the other three rack posts.
NOTE:
One rack unit has three holes, the middle of which is an auxiliary installation hole, and the other two are
standard installation holes. You can distinguish them by the space between each two holes. The space
between a standard installation hole and an auxiliary installation hole is larger than that between two
adjacent standard installation holes.
(2) Guide rail
Remarks
Mount this end to the front left rack post.
Mount this end to the front right rack post.
Figure 6.
13
(3) Installation hole