HP A10500 Series Manual page 40

Select Start > All Programs > Accessories > Communications > HyperTerminal.
1.
The Connection Description dialog box appears.
Enter the name of the new connection in the Name field and click OK.
2.
Figure 29 Connection description
Select the serial port to be used from the Connect using list, and click OK.
3.
Figure 30 Set the serial port used by the HyperTerminal connection
Set Bits per second to 9600, Data bits to 8, Parity to None, Stop bits to 1, and Flow control to None,
4.
and click OK.
37