Mitsubishi Electric AE-200A Instruction Book page 20

[6] [AHC] display
Touch [Monitor/Operation] in the menu bar, and then touch [AHC].
The status of input and output ports of each Advanced HVAC CONTROLLER (AHC) can be monitored.
Note: The [Controller] setting will appear (only on the AE-200's LCD) when the [System Exp] setting on the [Unit Info.] screen is set
to [Expand]. Switch the [Controller] setting between [AE200] and [Exp1] through [Exp4] to display the information for each
AE-200, AE-50, and EW-50 individually.
Controller
Select [AE] to display the
information for AE-200, and
select [1], [2], [3], or [4] to
display the information for
each AE-50/EW-50.
AHC icon
AHC address
Input status
Item
AHC icon
AHC address
Input status
Output status
Status of related equipment
Number of units whose filter
*1
sign is turned on
WT07992X02
The following icons indicate the AHC status.
: Normal
: A communication error is occurring or an error signal has been input to the AHC.
The address of the connected AHC will appear.
[Input port code * + Input port name + Input status] will appear.
* DI1–DI15 (Digital input), EI1–EI4 (Extended digital input), AI1–AI8 (Analog input)
Note: The status of the unused ports will not appear.
Note: If a communication error occurs with AHC, no port information will appear.
[Output port code * + Output port name + Output status] will appear.
* DO1–DO9 (Digital output), EO1–EO4 (Extended digital output), AO1–AO2 (Analog output)
Note: The status of the unused ports will not appear.
Note: If a communication error occurs with AHC, no port information will appear.
Touch to display the status of the equipment that are used to control the equipment that are
connected to the AHC.
The number of units whose filter sign is currently turned on will appear. Touching "
bring up the [Filter Sign] screen. (See section 3-4-2 "Filter Sign List".)
Description
20
Number of units whose
filter sign is turned on
Number of units in error
Output status
Status of related
equipment
" will