Mitsubishi Electric AE-200A Instruction Book page 78

Item
■ File name
(without connection to an AE-50/EW-50 controller)
"ChargeParameter30m"_[yyyy]-[mm]-[dd]"A"[Indoor unit address]-[Time period (1–5)].csv
(with connection to one or more AE-50/EW-50 controllers)
"ChargeParameter30m"_[yyyy]-[mm]-[dd]"A"[AE-50/EW-50 No. (1–4)
(1–5)].csv
*1 AE-50/EW-50 No. will not be shown for the AE-200 data.
■ File output destination
(without connection to an AE-50/EW-50 controller)
[Root folder of the USB memory]\[Serial No.]\"OperationalData"\"ChargeParameters30m"\"AE"\[Date]
(with connection to one or more AE-50/EW-50 controllers)
[Root folder of the USB memory]\[Serial No.]\"OperationalData"\"ChargeParameters30m"\
"AE"[AE-50/EW-50 No. (1–4)
*1 AE-50/EW-50 No. will not be shown for the AE-200 data.
Charge
Parameters
(30-minute
intervals)
■ File format
Row
*1 Each value is the cumulative value between the start date/time and the end date/time.
*2 The value will not appear if the data does not exist.
*3 Each file contains the data of up to 62 days.
*4 Even if the indoor unit is not equipped with a sub heater, "Sub-heater-ON time" is counted when the sub-heater-ON
■ File sample
621
03/10/2015 0:00-03/12/2015 23:30
Address 01
Date,Time,SaveValue,TermoTime,FanTime,SubHeaterTime
2015/03/10,0:00,57,102,150,0
2015/03/10,0:30,76,122,178,0
2015/03/10,1:00,100,122,178,0
:
2015/03/12,23:30,543,743,1340,0
WT07992X02
Example: ChargeParameter30m_2015-03-01A01-1.csv
Example: ChargeParameter30m_2015-03-01A1-01-1.csv
Note: Time periods 1 through 5 can only be set from TG-2000A or Initial Setting Tool. When shipped from
the factory, only Time period 1 is settable.
*1
Note: The AE-50/EW-50 data can be output from the AE-200.
Note: Only one AE-50's data can be output from the AE-50.
Item
1st File Type
2nd Data range
Indoor unit
3rd
address
4th Item
5th–
Data *1*2*3
66th
conditions are met, not when the sub heater actually turns on.
Description
]\[Date]
621
Start date + Start time + "–" + End date + End time
"Address" + M-NET address
"Date,Time,SaveValue,ThermoTime,FanTime,SubHeaterTime"
Date, Time, Capacity-save value (min), Thermo-ON time (min), Fan
operation time (min), Sub-heater-ON time (min)
78
*1
]-[Indoor unit address]-[Time period
Format
*4